What's the easiest way to bend wood for model ships? - riverboat model
I have a wooden model of a wooden boat curve, which requires forward. The model is only 30 "long and balsa wood.
Sunday, December 6, 2009
Riverboat Model What's The Easiest Way To Bend Wood For Model Ships?
Subscribe to:
Post Comments (Atom)
5 comments:
What (generally accepted to water vapor that is how most of the wood is bent.) A quick Google shows that the balsa wood soaked in water and ammonia mix the best. In fact, one site recommends Windex w / ammonia.
or cut with a sharp knife, but this song really important if u do
Get a pot of steam as soon as it begins to smoke, to secure the peace of wood that is usually bent over a barrel, to race back and forth on the pages of the wood purchased is soft and you can shape. When you make a helmet plates, after the initial installation of the peace, the peace was at hand, so that only overlap the first. Write now a line from first to second. That's how he shipbuilding, peace and everyone is made.
I soak in water to soak.
Ask any Newfoundland in Canada. A listing here to ask for their help - they are known to sail out of nowhere .... do not stink!
Post a Comment